Carot 1 FABRIZIOLO HA
May 16, 2012 16:37:34 GMT
Post by XTRProf on May 16, 2012 16:37:34 GMT
3 watts, man! But using though for certain parts though.
Carot One's latest sibling the FABRIZIOLO Headphone Amplifier. Designed, Engineered & Made in Italy.
Model: Carot 1 FABRIZIOLO
CAROT ONE
Carot One's latest sibling the FABRIZIOLO Headphone Amplifier. Designed, Engineered & Made in Italy.
Model: Carot 1 FABRIZIOLO
Carot One is an innovative brand from Italy offering very special electronics with technologically advanced features. The Carot One Headphone Amplifier makes use of the latest micro chip sizes, which exhibit outstanding performance.
With an input for iPod on the front panel and one for CD or DAC on the rear, this small box offers a high quality desktop option for those wanting a decent sound from their computer based media. Simply add a HRT USB DAC & Headphones for a complete desktop system.
Fine electronic circuits such as this a few years ago were unthinkable, but now with this new technology comes reduced dimensions. Thanks to precise and careful planning they have managed to obtain a high level of performance at exceptionally low cost.
Anodised aluminum orange casing of the Carot One looks cool, and makes a real statement in any decor. To maximise the enormous potential quality, Headphones or earphones that provide a precise and transparent sound will mate very well with the FABRIZIOLO.
Conveniently, the FABRIZIOLO provides a great sounding headphone amplifier output on the front panel, so you can continue to enjoy great sound even in the wee hours...
SPECIFICATIONS:
Specifications
Specification of the Headphone Amplifier Unit
Signal-to-Noise Ratio: (SNR) 92dB
Power Output: 3.0 Watts per channel on 33 Ohm Headphone
Frequency response: 15 Hz - 100 kHz -1db
Input Impedance: 10k Ohms
Input Audio: CD IN RCA (Left/Right) x 1 [3Vpp max.]
Specification of the Pre Amplifier Unit
Vacuum Tube: 6DJ8/6922 series or 12AU7 series (exchangeable)
Signal-to-Noise Ratio (SNR): 92dB
THD + Noise: 0.05% @ 10k ohm 0.15% @ 33 ohm
Input Audio: CD IN RCA (Left/Right) x 1 [3Vpp max.]
Power Socket: (5.5mm/2.1mm) x 1
Output Audio: OUT 3.5mm x 1
Headphone: OUT (3.5mm) x 1
Knob Audio and power switch x 1
Power Indicator: (Blue LED under Tube Socket) x1 Volume Knob x 1
Power Supply DC 12V-13V (max.)
Dimensions (W)76mm x (H)60mm x (D)100mm - 11 -
Specification of the AC Adaptor
AC Input Universal: AC 100V-240V/50-60Hz
DC Output: DC 12V 3.5A (42W)
DC Plug: DC 2.1mm
Ripple & Noise: <= 25mV
Over-load Protection: 105%-150%
Over-voltage Protection: 115%-150%
Dimensions (L)78mm x (W)50mm x (H)33mm
With an input for iPod on the front panel and one for CD or DAC on the rear, this small box offers a high quality desktop option for those wanting a decent sound from their computer based media. Simply add a HRT USB DAC & Headphones for a complete desktop system.
Fine electronic circuits such as this a few years ago were unthinkable, but now with this new technology comes reduced dimensions. Thanks to precise and careful planning they have managed to obtain a high level of performance at exceptionally low cost.
Anodised aluminum orange casing of the Carot One looks cool, and makes a real statement in any decor. To maximise the enormous potential quality, Headphones or earphones that provide a precise and transparent sound will mate very well with the FABRIZIOLO.
Conveniently, the FABRIZIOLO provides a great sounding headphone amplifier output on the front panel, so you can continue to enjoy great sound even in the wee hours...
SPECIFICATIONS:
Specifications
Specification of the Headphone Amplifier Unit
Signal-to-Noise Ratio: (SNR) 92dB
Power Output: 3.0 Watts per channel on 33 Ohm Headphone
Frequency response: 15 Hz - 100 kHz -1db
Input Impedance: 10k Ohms
Input Audio: CD IN RCA (Left/Right) x 1 [3Vpp max.]
Specification of the Pre Amplifier Unit
Vacuum Tube: 6DJ8/6922 series or 12AU7 series (exchangeable)
Signal-to-Noise Ratio (SNR): 92dB
THD + Noise: 0.05% @ 10k ohm 0.15% @ 33 ohm
Input Audio: CD IN RCA (Left/Right) x 1 [3Vpp max.]
Power Socket: (5.5mm/2.1mm) x 1
Output Audio: OUT 3.5mm x 1
Headphone: OUT (3.5mm) x 1
Knob Audio and power switch x 1
Power Indicator: (Blue LED under Tube Socket) x1 Volume Knob x 1
Power Supply DC 12V-13V (max.)
Dimensions (W)76mm x (H)60mm x (D)100mm - 11 -
Specification of the AC Adaptor
AC Input Universal: AC 100V-240V/50-60Hz
DC Output: DC 12V 3.5A (42W)
DC Plug: DC 2.1mm
Ripple & Noise: <= 25mV
Over-load Protection: 105%-150%
Over-voltage Protection: 115%-150%
Dimensions (L)78mm x (W)50mm x (H)33mm