|
Post by harmonix on Nov 9, 2019 15:34:12 GMT
Greetings all, this is my first post on the forum. I would be extremely grateful for some advice please regarding an X-Can V3. I will try to upload a photo but in the meantime I will describe the problem. I would like to know how to fix the issue of a snapped wire that is going into the SK4 connector, which sits next to the Alps volume pot, behind the front facia. (I clumsily broke it during the process of changing the tubes). There are 4 wires going into the connector block that sits in the SK4 location. One of the white wires is snapped and I can't reconnect. Unfortunately, I've mangled the little metal part inside the connector, where the white wire was fixed, in my attempt to remove and reconnect (DIY is not my forte). Any advice would be greatly appreciated! I suspect I need to order a new connector block and rewire that whole thing. But... I don't know what it's called or where I can order it from in UK. Thanks to anyone who can help me out! Link to photo of snapped wire & connection below: www.tumblr.com/blog/harmonix115
|
|