|
Post by puggie on Sept 30, 2019 21:06:28 GMT
Hi
I'm looking for a musical fidelity x-series v3 case ideally the smaller type from a DAC, phono-pre, psu, valve buffer etc, but cd player would be considered. I want the casing, so something that has died or been terminally modified would be ideal, but working and just cheap would be considered too. Condition is not that bigger deal if it's reflected in the price.
It's to house a raspberry pi based streamer, think the MF M1 Clic sort of thing. That is what I'm ultimately shooting for.
Thanks.
|
|
|
Post by PinkFloyd on Oct 1, 2019 8:53:02 GMT
Hi I'm looking for a musical fidelity x-series v3 case ideally the smaller type from a DAC, phono-pre, psu, valve buffer etc, but cd player would be considered. I want the casing, so something that has died or been terminally modified would be ideal, but working and just cheap would be considered too. Condition is not that bigger deal if it's reflected in the price. It's to house a raspberry pi based streamer, think the MF M1 Clic sort of thing. That is what I'm ultimately shooting for. Thanks. I'll have a look and see what I have. Mike.
|
|
|
Post by puggie on Oct 1, 2019 10:33:58 GMT
Hi Mike, that would be cool, I'm happy enough getting tatty aluminium re anodized black, making up new front and rear plates (may be doing that anyway), so long as its cheap
|
|
|
Post by PinkFloyd on Oct 1, 2019 10:40:47 GMT
This is the best I can come up with at short notice: Dimensions = 180mm (7.1") wide 88.2mm (3.5") high including feet 239mm (9.4") deep including knob Only one screw with the enclosure but it will give you an idea what type of screws are required. Enclosure is in decent condition. Front panel includes the blue power on LED plus connector:
|
|
|
Post by puggie on Oct 1, 2019 12:04:16 GMT
Hi Mike
That is just the sort of thing I'm looking for. How much do you want posted to Guildford?
Bill.
|
|
|
Post by PinkFloyd on Oct 1, 2019 12:15:38 GMT
Hi Mike That is just the sort of thing I'm looking for. How much do you want posted to Guildford? Bill. Is £20 shipped cheap enough? ;-)
|
|
|
Post by puggie on Oct 1, 2019 12:41:37 GMT
Certainly is. see my PM for payment
|
|
nando
Been here a while!
The Frying Dutchman
Always look on the bright side of life
Posts: 393
|
Post by nando on Oct 1, 2019 21:36:34 GMT
And one more happy chappy on this forum. Good work and I’m very curious about the proces and result.
|
|
|
Post by puggie on Oct 4, 2019 10:46:36 GMT
Case has arrived Mike, many thanks. the build should hopefully begin next week.
|
|