|
|
Post by giorgio on Aug 10, 2018 5:14:04 GMT
Hello dear friends, apart from greeting them all, I would like to ask you for help, I have an x-can v2 that does not sound when connected to the psu but when disconnecting it is heard, I think while downloading the capacitors, any idea what can it be? Could it be too much amperage at the source (3,8A)? thanks to all.
|
|
|
|
Post by PinkFloyd on Aug 10, 2018 10:02:27 GMT
Have a look inside the amp, are there any bulging capacitors on the top board?
All the best,
Mike.
|
|
|
|
Post by giorgio on Aug 10, 2018 13:22:44 GMT
Thanks for answering, all the capacitors are perfect, but I just realized that the new transformer delivers direct current, I think it can be that, I'm going to try an AC source and tell them what happens.
|
|
|
|
Post by PinkFloyd on Aug 10, 2018 18:41:14 GMT
Hi Giorgio, Yes, the power supply should be 12 Volts "AC".
Try that.
Best regards,
Mike.
|
|
|
|
Post by giorgio on Aug 11, 2018 2:10:52 GMT
Dear friends, it was indeed the psu, I removed the diode rectifier that I had and everything worked perfect.
thank you very much
|
|
