|
Post by darkarn on Jul 1, 2013 20:10:24 GMT
Hi guys, I was doing the MOSFET mod on my Bravo Audio V2 12AU7 amp when I somehow burnt off the copper tracks for the left MOSFET, now no current is going through the left MOSFET and thus I cannot hear anything from the left channel (right channel is working fine)
I urgently need a good picture of the PCB to be able to see how should I replace the copper track accordingly (I tried but the left MOSFET is still not working, I took some pictures but they did not show the connections that I need to know)
Please help ASAP, thanks!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 1, 2013 21:39:07 GMT
|
|
|
Post by darkarn on Jul 2, 2013 2:49:18 GMT
Hi thanks, but that thread is for a completely different model... And I still can't figure out how to connect the MOSFET from there :X
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 2, 2013 3:16:24 GMT
Hi thanks, but that thread is for a completely different model... And I still can't figure out how to connect the MOSFET from there :X Please check your Private Messages. Regards Alex
|
|