|
Post by peranders on Aug 19, 2005 8:08:07 GMT
|
|
|
Post by peranders on Nov 9, 2005 12:05:44 GMT
The amp is very very soon ready for testing...
|
|
|
Post by peranders on Nov 23, 2005 14:03:15 GMT
The amp is working now.
|
|
|
Post by peranders on Dec 2, 2005 12:04:26 GMT
|
|
|
Post by PinkFloyd on Dec 2, 2005 16:29:33 GMT
Hi Per,
Firstly my apologies for not responding to this thread.... Even though I run this forum I very seldom look at it which is not very good of me and I have completely missed this thread of yours!
That looks like one seriously nice amp indeed, how does one go about ordering a PCB (I assume you are selling this as a kit amp?) I, for one, would certainly love to have a go building this amp so can you let me know how / where to go about ordering it?
All the best.
Mike.
|
|
|
Post by peranders on Dec 15, 2005 7:51:27 GMT
I have pcb's but the rest you'll have to get yourself. Remember also: This project requires skills a bit more than the usual. If you manage to get every part in the right spot, boom, it will work but you must work very displined. One type, solder it, put it back into the plastic bag. Check both schematic and partslist when a part is mounted. Then take the next ect. Many parts are unmarked or have a cryptic marking so you can't have everything spread out.... ... but when you finally have it working I'm pretty convinced that you will be pleased. From what I know this is the only headphone amp with super regulators and on top of that dual mono. About the measurements: I have seen a guy measured with a better soundcard and the results are exciting for those simple transistors that I have used. www.jmd.szm.sk/Audio/Measurement/CF_amp/CF_amp.htmlwww.diyaudio.com/forums/showthread.php?postid=784679#post784679
|
|