pingu
Been here a while!
Reallising what has been taken on with the GB
Posts: 332
|
Post by pingu on Sept 22, 2017 10:24:18 GMT
Hi All,
A bit of advice please on dual rail psu configuration.
When using two mono amps for a head amp or a power amp should I
1. use two psu boards fed from one transformer 2. use two boards fed from two transformers 3. use one board and one transformer for amp boards
Obviously toroidal dual outputs and all will be fed through the ripple eaters used on here.
Thanks for the advise Martin
|
|
|
Post by videoguy on Sept 22, 2017 16:46:42 GMT
Hi Martin: For highest quality use 2 transformers. In order to keep expenditures under control; put two regular transformers in a separate plastic case. This way there is never any line level ac in the amplifier chassis.
Look for a P.M. from me.
Bil
|
|