|
Post by dragan on Mar 1, 2014 23:41:09 GMT
hi... long time no see... was looking on what to post after so long, and figured out I could share some of my photo skills here goes:
this was a first shot of this kind for me, hence total simplicity
|
|
alex30
Been here a while!
Posts: 156
|
Post by alex30 on Mar 2, 2014 13:19:57 GMT
It works well. Great headlamp highlight!
|
|
|
Post by PinkFloyd on Mar 2, 2014 15:16:39 GMT
Superb Dragan! I really like the way you captured the motion, what settings were your camera on?
Mike.
|
|
|
Post by dragan on Mar 2, 2014 16:12:22 GMT
shutter was 3 (or maybe 4) sec, f stop was around 8 if I recall correctly. ISO 50 (thats as low as my camera can go).
|
|
|
Post by stanga on Mar 2, 2014 21:18:13 GMT
Very respectable. Any more?
|
|
|
Post by dragan on Mar 2, 2014 22:04:38 GMT
would this do? Fresh out of camera/Photoshop this 1210 is undergoing full overhaul/restomod, being fully stripped and painted gloss white. Everything bare metal will be polished. I've taken this as a before shot - my main goal is actually to photograph writings/marking on a top plate, so we can reproduce those perfectly.
|
|
|
Post by dragan on Mar 2, 2014 22:06:53 GMT
hey, if anyone already has those marking as vector files, I'd greatly appreciate if he/she could forward those to me. It would save me a lot of boring work.
|
|
|
Post by stanga on Mar 2, 2014 23:36:10 GMT
would this do? Fresh out of camera/Photoshop this 1210 is undergoing full overhaul/restomod, being fully stripped and painted gloss white. Everything bare metal will be polished. I've taken this as a before shot - my main goal is actually to photograph writings/marking on a top plate, so we can reproduce those perfectly. You have a very good photographic eye. The only things I would have done different is to have the two chairs at either of the far ends of the picture in perfect symmetry, and the chair at the far end in the exact middle of the table. I might also have gone for getting the Technics name on the turntable mat to align up at 90 degrees. It is out by a couple of degrees.But that's just me, so don't take it as a criticism.
|
|
|
Post by dragan on Mar 3, 2014 0:21:28 GMT
few years ago I would still think and change the same things you mentioned now - I can't forgive myself for not putting someone at the far end of the table. It would be a lot better photograph if someone was there. As far as alignment of the mat goes, I'd say its very much parallel to the horizontal edge
|
|