GE DUAL Ripple Eater Boards - Limited Availablilty

[jonclancy]

Hi All,

I have just 100 of Greg's first run dual JLHRE boards up for grabs. These are a NOT FOR PROFIT distribution, and, as they are not my production run, do not include any Charity donation this time. All monies made will go to cover production costs and any over will go towards development of this project.

Edit to add the cost!!!!!

These DUAL boards are 2.50 GBP each, which includes any PayPal fees, but NOT postage.

These boards are the first initial run. They are electrically and mechanically A1, but are black soldermasked on the lower surface only.

As numbers are limited, please note a 10 board limit per request.

Rather than email or PM me, please ADD YOUR NAME TO THE LIST BELOW AND TALLY UP THE NUMBERS.

Once I have sufficient individual orders, I will go to the PO and have each one priced for postage. I'll then post payment details at that time and dispatch accordingly.

NAME No

Themystical 10 (tbn)


Over to you guys!

Jon

[Deleted]

Hi John

4 for me please

NAME No

Themystical 10 (tbn)
shaun 4

thanks

take care

[themystical]

I will start the ball rolling. Thanks Jon.

themystical 2

[themystical]

Sneaky ehh Shaun ......you must have got in whilst I was typing.

themystical 2
shaun 4

Total 6

[Deleted]

Feb 1, 2013 17:29:21 GMT themystical said:

Sneaky ehh Shaun ......you must have got in whilst I was typing.

themystical 2
shaun 4
DaveK

Total 10

[Deleted]

Hi Jon
I have posted about their availability in the thread that C.A.member Jim (sjoc2000) started in Computer Audiophile Forum.Jim's axperimentation may be of interest to some members.If you wish to contact Jim , send a PM to " n0vtz"
Regards
Alex

www.computeraudiophile.com/f6-dac-digital-analog-conversion/continuing-pursuit-power-supply-improvements-and-improved-dac-performance-14165/

[jonclancy]

Thanks Alex,

Hopefully we'll get some of those guys looking in here. I'm not a member of that forum.

Keep 'em coming folks!

[steveecrane]

Jon,

I'll take 4 duals please.

Thank you,

Steve.

PS Any circuit schematics / layout diags, et al, yet?

[Deleted]

Feb 1, 2013 19:59:34 GMT steveecrane said:

Jon,

I'll take 4 duals please.

Thank you,

Steve.

PS Any circuit schematics / layout diags, et al, yet?

Hi Steve
I am about to head off for early supermarket shopping. In the meantime , most of the information, including a copy of the original article from E.T.I magazine, is available at Greg Erskine's site. Click on Power Supplies.
Regards
Alex

users.tpg.com.au/gerskine/greg/default.htm

[4est]

I'll take ten of these please!

4est 10

total: 10

Thanks for making these available,

Forrest

[rafalkac]

Four for me :-)

rafalkac: 4

Thank you

[Deleted]

I'd like 2 please Jon

Thanks

Syd

[Deleted]

Four for me too please.

Tally so far;


shaun..........04
themystical...02
DaveK..........04
steveecrane..04
PinkFloyd......05
4est............10
rafalkac........04
juke.............02
cj................04


TOTAL>>>>>039

[4est]

In my request for 10, if that is deemed too much, then please sub with whatever amount seems appropriate.

Thank you and please excuse any confusion.

[Deleted]

I used Greg's Dual JLH boards in my build of Alex's class A power amp and believe me they are nice, easy to use, well laid out boards.

and most importantly they up the SQ quite a bit.

mmmmmmmmmmm

thanks Greg/John

take care

[jonclancy]

I've modified my original post to add the cost.

Sorry 'bout that!!!

Thanks for the endorsement, Shaun. Yes, these are another excellent iteration of the JLHRE. More technical details are available over at Greg's site.

HERE

[hirez69]

Sixfor me too please.

Tally so far;


shaun..........04
themystical...02
DaveK..........04
steveecrane..04
PinkFloyd......05
4est............10
rafalkac........04
juke.............02
cj................04
hirez69........06


TOTAL>>>>>045

[PinkFloyd]

Sorry Jon,

Can you make that 4 please

[jonclancy]

No probs, Mike.

Tally so far;


shaun..........04
themystical...02
DaveK..........04
steveecrane..04
PinkFloyd......04
4est............10
rafalkac........04
juke.............02
cj................04
hirez69........06


TOTAL>>>>>044

[listener]

Sandyk's post at Computer Audiophile lead me to this site, thank-you.

I must apologize that my first post is a request to join your group purchase. I hope that is not seen as too opportunistic.

I would like to order 4 please.

Listener......04

Tally so far;


shaun..........04
themystical...02
DaveK..........04
steveecrane..04
PinkFloyd......04
4est............10
rafalkac........04
juke.............02
cj................04
hirez69........06
Listener..........04

TOTAL>>>>>048

Steven.

[Deleted]

Hi Steven
wgscott suggested in a C.A. post not that long back, that Chris Connaker should consider a DIY area in C.A. Jim, Forrest, Paul and Jud already have JLH PCBs. I would hope that more C.A. members find out for themselves the improved SQ available from USB audio when using decent quality Linear PSUs, and if possible, using modified USB leads as in the attached diagram in the post that I made in Jim's C.A. thread.
Kind Regards
Alex

[listener]

Alex.

I agree.

I use a Linear Bench Supply for my PC, see here with my old Music PC:-
www.stereo.net.au/forums/index.php?/topic/41494-linear-power-supply-for-music-pc/

See post #22 for my peripherals PSU.

See here at post #20 for my new Music PC and wiring loom:-
www.stereo.net.au/forums/index.php?/topic/49276-bench-psu-working-with-cmp2-pc-setup-pics-at-post-29/

None of my stuff is very complicated so I would like to do something a little more 'serious' which is why I want to try the GDREB's.

Good site this!

Steven.

[Deleted]

Hi Steven
Are you in Brisbane, or up in the flooded areas further north?
We have a couple of members in Brisbane, one of whom (JeffC) is well acquainted with the JLH PCBs in higher current PSUs for laptops too, and is using a couple in an almost completed build of the 15W Class A amplifier project.
Kind Regards
Alex

[listener]

Alex.

I'm at the top of the Sunshine Coast, near Noosa.

I get down to Brissie about once a month though, Maybe I should contact JeffC.

Apologies to the OP for going off topic.

Steven.

[Deleted]

(JeffC) is well acquainted with the JLH PCBs in higher current PSUs for laptops too

Now you've got my attention!

Er, Jeffc, come on down and tell all

Cheers,